 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| rp132x series low on resistance / low voltage 1a ldo no.ea-265-160426 1 outline the rp132x series are voltage-regulators with a built-in low on-resistance transistor and output current is 1a capability. these ics have two versions: fixed output vo ltage type and externally adjust able output voltage type. the minimum output voltage can be set from 1.4v. otherwi se, the load regulation of rp132x has much improved when compared with conventional regulators. it's typ.5mv at i out = 0.1ma to 1a. each of these ics consists of a voltage reference unit, an er ror amplifier, a resistor net for setting output voltage, current limit circuits to prevent over-current and a therma l-shutdown circuit. a standby mode with ultra low supply current can be realized with the chip enable function. a dditionally, e/f version with delay pin for inrush current limit time setting are also available. the packages for these ics are dfn(plp)1820-6, so t-89-5, hsop-6j and to-252-5-p2. dfn(plp)1820-6 is suitable for high density mounting of the ics on boards. sot-89-5, hsop-6j and to-252-5-p2 are supporting high wattage. features ? output current ............................................................ min. 1a ? supply current ............................................................. typ. 65 a ? standby current ......................................................... typ. 0.15 a ? input voltage range ................................................... 1.4v to 6.5v ? output voltage ra nge .................................................. fixed output voltage type: 0.8v to 5.5v (0.1v steps) adjustable output voltage type: 0.8v to 5.5v ( for other voltages, please re fer to mark informations.) ? dropout voltage ............................................................ typ. 0.52v (v out = 2.8v, i out = 1a) ? ripple rejectio n ........................................................... typ. 70db (f = 1khz, v out = 2.8v) ? output voltage accuracy .............................................. 1.0% ? output voltage temperature-drift coefficient .............. typ. 60ppm/ c ? line regulation ............................................................ typ. 0.052%/v ? load regulati on ......................................................... typ. 3mv at i out = 300ma, typ. 5mv at i out = 1a ? packages .................................................................... dfn(pl p)1820-6, sot-89-5, hsop-6j,to-252-5-p2 ? inrush current limit circuit ......................................... typ. 500ma b/d version: inrush current limit time is 500 s. e/f version: inrush current limit time is adjustable. ? fold-back protection ci rcuit ....................................... typ. 250ma (cur rent at short mode) ? thermal shutdown circui t .......................................... thermal s hutdown temperature: typ. 165 c released temperature: typ. 95 c ? auto discharge func tion ............................................ d, f version ? ceramic capacitors are recommend ed to be used with this ic .... 2.2 f or more (v out 3.6v) 4.7 f or more (v out > 3.6v) applications ? power source for battery-powered equipment. ? power source for portable communication equipment ? power source for electrical appliances such as cameras, vcrs and camcorders. ? power source for home appliances and notebook pc.
rp132x no.ea-265-160426 2 block diagrams ? fixed output voltage type hsop-6j / sot89-5 rp132sxx1b / rp132hxx1b rp132sxx1d / rp132hxx1d v dd gnd v out ce vref current limit thermal shutdown v dd gnd v out ce vref current limit thermal shutdown ? fixed output voltage type to-252-5-p2 / dfn(plp)1820-6 rp132jxx1b / rp132kxx1b rp132jxx1d / rp132kxx1d v dd gnd v out ce vref current limit thermal shutdown v fb v dd gnd v out ce vref current limit thermal shutdown v fb ? fixed output voltage type with delay pin hsop-6j rp132sxx1e rp132sxx1f v dd gnd v out ce vref current limit thermal shutdown delay v dd gnd v out ce vref current limit thermal shutdown delay rp132x no.ea-265-160426 3 ? fixed output voltage type with delay pin dfn(plp)1820-6 rp132kxx1e rp132kxx1f v dd gnd v out ce vref current limit thermal shutdown v fb delay v dd gnd v out ce vref current limit thermal shutdown v fb delay ? adjustable output voltage type hsop-6j / sot-89-5 / to-252-5-p2 /dfn(plp)1820-6 rp132s001b / rp132h001b / rp132s001d / rp132h001d / rp132j001b / rp132k001b rp132j001d / rp132k001d v dd gnd v out ce vref current limit thermal shutdown v fb v dd gnd v out ce vref current limit thermal shutdown v fb ? adjustable output voltage type with delay pin dfn(plp)1820-6 rp132k001e rp132k001f v dd gnd v out ce vref current limit thermal shutdown v fb delay v dd gnd v out ce vref current limit thermal shutdown v fb delay rp132x no.ea-265-160426 4 selection guide the output voltage, the auto discharge f unction, and the package type for the ics can be selected at the user?s request. product name package quantity per reel pb free halogen free rp132k001 ? -tr dfn(plp)1820-6 5,000 pcs yes yes rp132kxx1 ? -tr rp132h001 # -t1-fe sot-89-5 1,000 pcs yes yes rp132hxx1 # -t1-fe rp132s001 # -e2-fe hsop-6j 1,000 pcs yes yes rp132sxx1 ? -e2-fe rp132j001 # -t1-fe to-252-5-p2 3,000 pcs yes yes rp132jxx1 # -t1-fe rp132x001x is the adjustable output voltage type. xx: the output voltage can be designated in the ran ge from 0.8v(08) to 5.5v(55) in 0.1v step. ?: the combination of the auto discharge function and del ay pin (for setting inrush current limit time) are as follows. b: without auto discharge function d: with auto discharge function e: without auto discharge function, with del ay pin (for setting inrush current limit time) f: with auto discharge function and delay pin (for setting inrush current limit time) #: the auto discharge function at off state are options as follows. b: without auto discharge function at off state d: with auto discharge function at off state auto-discharge function quickly lowers the ou tput voltage to 0v, when the chip enable si gnal is switched from the active mode to the standby mode, by releasing the electrical charge accumulated in the external capacitor. rp132x no.ea-265-160426 5 pin configurations ? dfn(plp)1820-6 ? sot-89-5 ? hsop-6j ? to-252-5-p2 top view 6 5 4 1 2 3 bottom view 4 5 6 3 2 1 ? 13 54 2 13 64 2 5 1 2345 pin descriptions ? dfn(plp)1820-6 pin no. symbol pin description 1 v out output pin 2 v fb feed back pin 3 gnd ground pin 4 ce chip enable pin ("h" active) 5 nc no connection (rp132k001b/d, rp132kxx1b/d) delay delay pin (for setting inrush current limit time) (rp132k001e/f, rp132kxx1e/f) 6 v dd input pin ? tab is gnd level. (they are connected to the reverse side of this ic.) the tab is better to be connected to the gnd, but leaving it open is also acceptable. ? when using fixed output voltage type(rp132kxx1x), the v out pin and the v fb pin should be connected. ? when using adjstable output voltage type (rp132k001x ), please follow "notes on the adjustable output voltage type settings". rp132x no.ea-265-160426 6 ? sot-89-5 pin no. symbol pin description 1 ce chip enable pin ("h" active) (rp132hxx1b/d) v fb feed back pin (rp132h001b/d) 2 gnd ground pin 3 nc no connection (rp132hxx1b/d) ce chip enable pin ("h" active) (rp132h001b/d) 4 v dd input pin 5 v out output pin ? when using adjstable output voltage type (rp132h001x), please follow "n otes on adjustable output voltage type settings". ? hsop-6j pin no. symbol pin description 1 v out output pin 2 gnd ground pin *1 3 nc no connection (rp132sxx1b/d) v fb feed back pin (rp132s001b/d) delay delay pin (for setting inrush current limit time)(rp132sxx1e/f) 4 ce chip enable pin ("h" active) 5 gnd ground pin *1 6 v dd input pin *1 no.2 pin and no.5 pin must be wired each other when mounted on boards. ? when using adjstable output voltage type (rp132s001x), please follow "notes on adjustable output voltage type settings". ? to-252-5-p2 pin no. symbol pin description 1 ce chip enable pin ("h" active) 2 v dd input pin 3 gnd ground pin 4 v out output pin 5 v fb feed back pin ? tab is gnd level. (they are connected to the reverse side of this ic.) the tab is better to be connected to the gnd, but leaving it open is also acceptable. ? when using fixed output voltage type(rp132jxx1x),v out pin and v fb pin should be connected. ? when using adjstable output voltage type (rp132j001 x), please follow "notes on the adjustable output voltage type settings". rp132x no.ea-265-160426 7 absolute maximum ratings symbol item rating unit v in input voltage 7.0 v v ce input voltage (ce pin) ? 0.3 to 7.0 v v fb input voltage (v fb pin) ? 0.3 to 7.0 v v out output voltage ? 0.3 to v in + 0.3 v p d power dissipation (dfn(plp)1820-6) ? 880 mv power dissipation (sot-89-5) ? 900 power dissipation (hsop-6j) ? 1700 power dissipation (to-252-5-p2) ? 1900 t opt operating temperature range ? 40 to 85 c t stg storage temperature range ? 55 to 125 c ? ) for power dissipation, please refer to package information. absolute maximum ratings electronic and mechanical stress momentarily exceeded absolute maximum ratings may cause the permanent damages and may degrade the life time and safe ty for both device and sy stem using the device in the field. the functional operation at or over these absolute maximum ratings is not assured. rp132x no.ea-265-160426 8 electrical characteristics v in = set v out + 1.0v, i out = 1ma,c in = 2.2 f, c out = 2.2 f ( v out 3.6v ) , 4.7 f ( v out 3.6v ). the specification in is checked and guaranteed by design engineering at ? 40 c t opt 85 c, unless otherwise noted. ? rp132xxx1b/d(fixed output voltage type) ? rp132s/kxx1e/f(fixed output voltage type with delay pin) topt = 25 c symbol item conditions min. typ. max. unit v out output voltage t opt = 25 c v out > 1.5v 1.01 1.5v ? ? 40 c t opt 85 c v out > 1.5v 0.981 1.019 v v out 1.5v ? 29 29 v out / i out load regulation 0.1ma i out 300ma 3 20 mv 0.1ma i out 1a 5 60 v dif dropout voltage refer to the following "dropout voltage" i ss supply current i out = 0ma (v in = 6.5v) 65 85 a i standby standby current v ce = 0v, v in = 6.5v 0.15 0.60 a v out / v in line regulation set v out + v in 6.5v ? however, v in 1.6v 0.05 0.10 %/v rr ripple rejection f = 1khz ripple 0.2vp-p i out = 100ma v out 3.3v 70 db v out > 3.3v 60 v in input voltage 1.4 6.5 v v out / t opt output voltage temperature coefficient ? 40 c t opt 85 c 60 ppm / c i sc short current limit v out = 0v 250 ma i pd ce pull-down current 0.3 0.7 a v ceh ce input voltage "h" 1.0 v v cel ce input voltage "l" 0.4 v en output noise bw = 10hz to 100khz 70 vrms c t tsr thermal shutdown released temperature junction temperature 95 c r low low output nch tr. on resistance (d/f version) v in = 4.0v, v ce = 0v 50 i delay delay pin current (delay pin version) v in = 4.0v 0.7 1.2 1.7 a all test items listed under electrical characte ristics are done under the pulse load condition (tj ta=25oc) except output noise, ripple rejection, out put voltage temperature coefficient, dr opout voltage at 1a output current and load regulation and thermal shutdown. rp132x no.ea-265-160426 9 ? dropout voltage topt = 25c output voltage v out (v) dropout voltage v dif (v) condition typ. max. condition typ. max. 0.8 v out < 0.9 i out = 300ma 0.67 0.89 i out = 1a 1.20 1.54 0.9 v out < 1.0 0.59 0.82 1.10 1.46 1.0 v out < 1.1 0.51 0.73 1.05 1.39 1.1 v out < 1.2 0.42 0.63 0.96 1.31 1.2 v out < 1.5 0.36 0.54 0.90 1.23 1.5 v out < 2.6 0.24 0.33 0.78 1.05 2.6 v out < 3.3 0.15 0.21 0.52 0.72 3.3 v out 5.5 0.13 0.18 0.46 0.68 the specification in is checke d and guaranteed by design engineering at ? 40 c t opt 85 c, unless otherwise noted. all test items listed under electrical characte ristics are done under the pulse load condition (tj ta=25oc) except output noise, ripple rejection, out put voltage temperature coefficient, dr opout voltage at 1a output current and load regulation and thermal shutdown. recommended operating conditions (electrical characteristics) all of electronic equipment should be designed that the mounted semiconductor devices operate within the recommended operating conditions. the semiconductor devices cannot operate normally over the recommended operating conditions, even if when they are used over such conditions by momentary electronic noise or surge. and the semiconductor de vices may receive serious damage when they continue to operate over the recommended operating conditions. rp132x no.ea-265-160426 10 electrical characteristics v in = set v out + 1.0v, i out = 1ma,c in = 2.2 f, c out = 2.2 f ( v out 3.6v ) , 4.7 f ( v out 3.6v ). the specification in is checked and guaranteed by design engineering at ? 40 c t opt 85 c, unless otherwise noted . ? rp132x001b/d(adjustable output voltage type) ? rp132k001e/f(adjustable output voltage type with delay pin) topt = 25 c symbol item conditions min. typ. max. unit v fb feedback voltage t opt = 25 c v out = v fb 0.785 0.800 0.815 v ? 40 c t opt 85 c 0.771 0.829 v out output voltage adjusting range 0.8 5.5 v i lim output current limit v out = v fb 1 a v out / i out load regulation 0.1ma i out 300ma 3 20 mv 0.1ma i out 1a 5 60 v dif dropout voltage v out = v fb i out = 300ma 0.67 0.89 v i out = 1a 1.20 1.54 i ss supply current v out = v fb , i out = 0ma (v in = 6.5v) 65 85 a i standby standby current v ce = 0v, v in = 6.5v 0.15 0.60 a v out / v in line regulation v out = v fb , 1.6v v in 6.5v 0.05 0.10 %/v rr ripple rejection f = 1khz, ripple 0.2vp-p, i out = 100ma v out = v fb 70 db v in input voltage 1.4 6.5 v v out / t opt output voltage temperature coefficient ? 40 c t opt 85 c 60 ppm / c i sc short current limit v out = v fb = 0v 250 ma i pd ce pull-down current 0.3 0.7 a v ceh ce input voltage "h" 1.0 v v cel ce input voltage "l" 0.4 v en output noise bw = 10hz to 100khz 70 vrms c t tsr thermal shutdown released temperature junction temperature 95 c r low low output nch tr. on resistance (d/f version) v in = 4.0v, v ce = 0v 50 i delay delay pin current (delay pin version) v in = 4.0v 0.7 1.2 1.7 a all of unit are tested and specified under load conditions such that tj t opt = 25c except for output noise, ripple rejection, output voltage temperature coefficient, dr opout voltage at 1a output current and load regulation and thermal shutdown. rp132x no.ea-265-160426 11 typical application ? fixed output voltage type (hsop-6j/ sot89-5) c1 v dd v out ce gnd c2 v out rp132s/h xx1x ? fixed output voltage type (to-252-5-p2/ dfn(plp)1820-6) v out c1 rp132j/k xx1x v dd v out gnd c2 ce v fb ? adjustable output voltage type (hsop-6j / sot89-5/ to-252-5-p2 / dfn(plp)1820-6 v out c1 rp132x 001x v dd v out gnd c2 ce v fb r2 r1 rp132x no.ea-265-160426 12 ? fixed output voltage type with delay pin (hsop-6j) c1 v dd v out ce gnd c2 v out rp132s xx1e/f delay c d ? fixed output voltage type with delay pin (dfn(plp)1820-6) v out c1 rp132k xx1e/f v dd v out gnd c2 ce v fb delay c d ? adjustable output voltage type with delay pin (dfn(plp)1820-6) v out c1 rp132k 001e/f v dd v out gnd c2 ce v fb r2 r1 delay c d rp132x no.ea-265-160426 13 recommendation value of the external capacitors v out capacitors v out 3.6v c1 kyocera 2.2 f (size:1005) [cm05x5r225m06a] c2 kyocera 2.2 f (size:1608) [cm105x5r225k06ab] v out > 3.6v c1 kyocera 2.2 f (size:1005) [cm05x5r225k06a] c2 kyocera 4.7 f (size:1608) [cm105x5r475m06ab] please refer to "technical notes on adjustable output vo ltage type" when using r1 and r2 as output capacitors. also refer to "inrush current limit time settings" concerning with c d . technical notes when using these ics, consider the following points: phase compensation in these ics, phase compensation is made for securing stable operation even if the load current is varied. for this purpose, use a capacitor c2 with good frequency ch aracteristics and esr (equivalent series resistance). if a tantalum capacitor is used, and its esr of c2 is large, the loop oscillati on may result. because of this, select c2 carefully considering its frequency characteristics. pcb layout make v dd and gnd lines sufficient. if their impedance is hi gh, noise pickup or unstable operation may result. connect a capacitor c1 between v dd and gnd pin with a capacitance value as "recommendation value of the external capacitors" above or more, and as close as possible to the pins. set external components, especially t he output capacitor c2, as close as possible to the ics, and make wiring as short as possible. rp132x no.ea-265-160426 14 technical notes on adjustable output voltage type v out c1 rp132x 001x v dd v out gnd c2 ce v fb r2 r1 typical application for adjustable output voltage type hsop-6j / sot89-5/ to-252-5-p2 / dfn(plp)1820-6 v out c1 rp132k 001e/f v dd v out gnd c2 ce v fb r2 r1 delay c d typical application for adjustable output voltage type with delay pin dfn(plp)1820-6 recommendation value of the external capacitors v out capacitors v out 3.6v c1 kyocera 2.2 f (size:1005) [cm05x5r225m06a] c2 kyocera 2.2 f (size:1608) [cm105x5r225k06ab] v out > 3.6v c1 kyocera 2.2 f (size:1005) [cm05x5r225k06a] c2 kyocera 4.7 f (size:1608) [cm105x5r475m06ab] phase compensation similar to the fixed output voltage type, phase compens ation is made for the adjustable output voltage type for securing stable operation even if the load cu rrent is varied. for this purpose, use a 4.7 f or more capacitor c2 between v out pin and gnd pin, and as close as possible to the pins. pcb layout make v dd and gnd lines sufficient. if their impedance is hi gh, noise pickup or unstable operation may result. connect a capacitor c1 with a capacitance value as much as 2.2 f or more between v dd and gnd pin, and as close as possible to the pins. when using the adjustable output voltage type, the tr ansient response could be affected by the external resistors. evaluate the circuit taking the actual conditions of use into account. rp132x no.ea-265-160426 15 adjustable output voltage type settings ? output voltage setting method rp132x081x can be adjusted the output voltage up to 5. 5v by using the external divider resistors. also, please use 16k or less for r2 resistor. if the v fb voltage is described as setv fb , the output voltage can be set by using the following equations setv fb is equal to 0.8v. the v out pin of rp132x081x should be connected to the v fb pin. gnd v fb r ic r2 i ic i1 i2 r1 setv fb v out v out i1 = i ic + i2 ............................................................................................................................ ....... (1) i2 = setv fb / r2 ......................................................................................................................... .. (2) thus, i1 = i ic + setv fb /r2 ..................................................................................................................... (3) therefore, v out = setv fb r1 i1 .............................................................................................................. (4) put equation (3) into equation (4), then v out = setv fb + r1(i ic + setv fb / r2) = setv fb (1+r1 / r2) + r1 i ic ......................................................................................... (5) in equation (5), r1x i ic is the error-causing factor in v out . as for i ic , i ic = setv fb / r ic .......................................................................................................................... (6) therefore, the error-causing factor r1x i ic can be described as follows. r1 i ic = r1 setv fb / r ic = setv fb r1 / r ic ........................................................................................................... (7) for better accuracy, choosing r1 (< rp132x no.ea-265-160426 17 test circuits ? fixed output voltage type hsop-6j / sot89-5 c1 rp132s/h xx1x v dd v out ce gnd v c2 v out i out basic test circuit c1 v dd v out ce gnd c2 a i ss v out r p132s/h xx1x test circuit for supply current rp132s/h xx1x v dd v out ce gnd c2 pulse generator i out p. g. test circuit for ripple rejection i outa i outb c1 rp132s/h xx1x v dd v out ce gnd c2 v out test circuit for load transient response rp132x no.ea-265-160426 18 ? fixed output voltage type to-252-5-p2 / dfn(plp)1820-6 c1 rp132x series v dd v out ce gnd v c2 v out i out v dd v out ce gnd rp132j/k xx1x v fb basic test circuit c1 v dd v out ce gnd a i ss v out rp132x series v dd v out ce gnd rp132j/k xx1x v fb c2 test circuit for supply current rp132x series v dd v out ce gnd pulse generator i out p. g. v dd v out ce gnd rp132x series v fb v dd v out ce gnd rp132j/ k xx1x v fb c2 test circuit for ripple rejection i outa i outb c1 rp132x series v dd v out ce gnd v out v dd v out ce gnd rp132j/k xx1x v fb c2 test circuit for load transient response rp132x no.ea-265-160426 19 ? fixed output voltage type with delay pin (hsop-6j) c1 rp132x series v dd v out ce gnd v c2 v out i out v dd v out ce gnd rp132s xx1e/f delay c d delay c d basic test circuit c1 v dd v out ce gnd a i ss v out rp132x series v dd v out ce gnd rp132s xx1e/f c2 c d delay test circuit for supply current rp132x series v dd v out ce gnd pulse generator i out p. g. v dd v out ce gnd rp132x series v fb v dd v out ce gnd rp132s xx1e/f c2 c d delay test circuit for ripple rejection i outa i outb c1 rp132x series v dd v out ce gnd v out v dd v out ce gnd rp132s xx1e/f c2 c d dela y test circuit for load transient response please refer to "inrush current limit time settings" concerning with c d . rp132x no.ea-265-160426 20 ? fixed output voltage type with delay pin (dfn(plp)1820-6) c1 rp132x series v dd v out ce gnd v c2 v out i out v dd v out ce gnd rp132 k xx1e/f v fb delay c d delay c d basic test circuit c1 v dd v out ce gnd a i ss v out rp132x series v dd v out ce gnd rp132 k xx1e/f v fb c2 c d delay test circuit for supply current rp132x series v dd v out ce gnd pulse generator i out p. g. v dd v out ce gnd rp132x series v fb v dd v out ce gnd rp132 k xx1e/f v fb c2 c d delay test circuit for ripple rejection i outa i outb c1 rp132x series v dd v out ce gnd v out v dd v out ce gnd rp132k xx1e/f v fb c2 c d delay test circuit for load transient response please refer to "inrush current limit time settings" concerning with c d . rp132x no.ea-265-160426 21 ? adjustable output voltage type hsop-6j / sot89-5/ to-252-5-p2 / dfn(plp)1820-6 c1 rp132x series v dd v out ce gnd v c2 v out i out v dd v out ce gnd rp132x 001x v fb r2 r1 basic test circuit c1 v dd v out ce gnd a i ss v out rp132x series r2 v dd v out ce gnd rp132x 001x v fb c2 r1 test circuit for supply current rp132x series v dd v out ce gnd pulse generator i out p. g. v dd v out ce gnd rp132x series v fb r2 v dd v out ce gnd rp132x 001x v fb c2 r1 test circuit for ripple rejection i outa i outb c1 rp132x series v dd v out ce gnd v out r2 v dd v out ce gnd rp132x 001x v fb c2 r1 test circuit for load transient response please refer to "technical notes on adjustable output voltage type" when using r1 and r2 as output capacitors. rp132x no.ea-265-160426 22 ? adjustable output voltage type with delay pin dfn(plp)1820-6 c1 rp132x series v dd v out ce gnd v c2 v out i out v dd v out ce gnd rp132k 001e/f v fb r2 r1 delay c d basic test circuit c1 v dd v out ce gnd a i ss v out rp132x series r2 v dd v out ce gnd rp132k 001e/f v fb c2 r1 delay c d test circuit for supply current rp132x series v dd v out ce gnd pulse generator i out p. g. v dd v out ce gnd rp132x series v fb r2 v dd v out ce gnd rp132k 001e/f v fb c2 r1 delay c d test circuit for ripple rejection i outa i outb c1 rp132x series v dd v out ce gnd v out r2 v dd v out ce gnd r p132k 001e/f v fb c2 r1 delay c d test circuit for load transient response please refer to "technical notes on adjustable output voltage type" when using r1 and r2 as output capacitors. also refer to "inrush current limit time settings" concerning with c d . rp132x no.ea-265-160426 23 typical characteristics 1) output voltage vs. input voltage (t opt =25 c) rp132x081x rp132x151x rp132x331x rp132x551x 2) supply current vs. input voltage (t opt =25 c) rp13x081x rp132x151x 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0246 input voltage v in (v) output voltage v out (v) iout=1ma iout=50ma iout=100ma iout=300ma 0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 0246 input voltage v in (v) output voltage v out (v) iout=1ma iout=50ma iout=100ma iout=300ma 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 0246 input voltage v in (v) output voltage v out (v) iout=1ma iout=50ma iout=100ma iout=300ma 0 0 1 2 3 4 5 6 0246 input voltage v in (v) output voltage v out (v) iout=1ma iout=50ma iout=100ma iout=300ma 0 10 20 30 40 50 60 70 0246 input voltage v in (v) supply current iss (a) 0 10 20 30 40 50 60 70 80 0246 input voltage v in (v) supply current iss (a) rp132x no.ea-265-160426 24 rp132x331x rp132x551x 3) supply current vs. temperature rp132x081x rp132x151x rp132x331x rp132x551x 0 10 20 30 40 50 60 70 80 90 0246 input voltage v in (v) supply current iss (a) 0 20 40 60 80 100 120 140 0246 input voltage v in (v) supply current iss (a) 0 10 20 30 40 50 60 70 80 90 -50 -25 0 25 50 75 100 temperature topt (c) supply current i ss (a) 0 10 20 30 40 50 60 70 80 90 -50-250 255075100 temperature topt (c) supply current i ss (a) 0 10 20 30 40 50 60 70 80 90 -50 -25 0 25 50 75 100 temperature topt (c) supply current i ss (a) 0 10 20 30 40 50 60 70 80 90 -50 -25 0 25 50 75 100 temperature topt (c) supply current i ss (a) rp132x no.ea-265-160426 25 4) output voltage vs. temperature rp132x081x rp132x151x rp132x331x rp132x551x 5) dropout voltage vs. output current rp132x081x rp132x151x 0.77 0.78 0.79 0.80 0.81 0.82 0.83 0.84 -50 -25 0 25 50 75 100 temperature (c) output voltage v out (v) 1.47 1.48 1.49 1.50 1.51 1.52 1.53 1.54 -50 -25 0 25 50 75 100 temperature (c) output voltage v out (v) 3.27 3.28 3.29 3.30 3.31 3.32 3.33 3.34 -50 -25 0 25 50 75 100 temperature (c) output voltage v out (v) 5.47 5.48 5.49 5.50 5.51 5.52 5.53 5.54 -50 -25 0 25 50 75 100 temperature (c) output voltage v out (v) 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 200 400 600 800 1000 output current i out (ma) dropout voltage v dif (v) 85c 25c -40c 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 200 400 600 800 1000 output current i out (ma) dropout voltage v dif (v) 85c 25c -40c 0 rp132x no.ea-265-160426 26 rp132x331x rp132x551x 6) dropout voltage vs. set output voltage 7) ripple rejection vs. input voltage (c1=none, ripple=0.2vp-p, t opt =25 c) rp132x331x rp132x331x 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 200 400 600 800 1000 output current i out (ma) dropout voltage v dif (v) 85c 25c -40c 0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0 200 400 600 800 1000 output current i out (ma) dropout voltage v dif (v) 85c 25c -40c 0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0246 set output voltage v reg (v) dropout voltage v dif (v) 1a 800ma 600ma 300ma 100ma 0 0 10 20 30 40 50 60 70 80 90 3.0 3.5 4.0 4.5 5.0 5.5 6.0 6.5 input voltage v in (v) ripple rejection rr(db ) f=0.2khz f=1khz f=10khz f=100khz c2 = c eram i c 2 . 2 f i out =1ma 0 10 20 30 40 50 60 70 80 90 3.03.54.04.55.05.56.06.5 input voltage v in (v) ripple rejection rr(db ) f=0.2khz f=1khz f=10khz f =100khz c 2= c eramic2.2 f i out =30ma rp132x no.ea-265-160426 27 rp132x331x rp131x551x rp132x551x rp132x551x 8) ripple rejection vs. frequency (c1=none, t opt =25 c ) rp132x081x rp132x331x 0 10 20 30 40 50 60 70 80 90 3.03.54.04.55.05.56.06.5 input voltage v in (v) ripple rejection rr(db ) f=0.2khz f=1khz f=10khz f=100khz c 2= c eramic2.2 f i out =50ma 0 10 20 30 40 50 60 70 80 90 5.5 5.7 5.9 6.1 6.3 6.5 input voltage v in (v) ripple rejection rr(db ) f=0.2khz f=1khz f=10khz f=100khz c2=ceramic4.7 f i out =1ma 0 10 20 30 40 50 60 70 80 90 5.55.75.96.16.36.5 input voltage v in (v) ripple rejection rr(db ) f =0.2khz f=1khz f =10khz f =100khz c2=ceramic4.7 f i out =10ma 0 10 20 30 40 50 60 70 80 90 5.5 5.7 5.9 6.1 6.3 6.5 input voltage v in (v) ripple rejection rr(db ) f =0.2khz f=1khz f =10khz f =100khz c 2= c eramic4.7 f i out =100ma 0 10 20 30 40 50 60 70 80 90 100 0.1 1 10 100 1000 frequency f (khz) ripple rejention rr (db ) iout=1ma iout=30ma iout=100ma c2=ceramic 2.2 f 0 10 20 30 40 50 60 70 80 90 100 0.1 1 10 100 1000 frequency f (khz) ripple rejention rr (db ) iout=1ma iout=30ma iout=100ma c2=ceramic 2.2 f rp132x no.ea-265-160426 28 rp132x551x 9) input transient response (c1=none, i out =100ma, tr=tf=5 s, t opt =25 c) rp132x081x rp132x331x rp132x551x 0 10 20 30 40 50 60 70 80 90 100 0.1 1 10 100 1000 frequency f (khz) ripple rejention rr (db ) iout=1ma iout=30ma iout=100ma c2=ceramic 4.7 f 0.78 0.79 0.80 0.81 0.82 0.83 0.84 0.85 -10 0 10 20 30 40 50 60 70 80 90 time t (s) output voltage v out (v) - - - 1.0 2.0 3.0 4.0 input voltage v in (v) c2=ceramic2.2 f input voltage 1.8v ? 2.8v output voltage 3.28 3.29 3.30 3.31 3.32 3.33 3.34 3.35 -10 0 10 20 30 40 50 60 70 80 90 time t (s) output voltage v out (v) - 3.0 4.0 5.0 6.0 input voltage v in (v) c2=ceramic2.2 f input voltage 4.3v ? 5.3v output voltage 5.48 5.49 5.50 5.51 5.52 5.53 5.54 5.55 -10 0 10 20 30 40 50 60 70 80 90 time t (s) output voltage v out (v) 5.5 6.5 7.5 input voltage v in (v) c2=ceramic4.7 f input voltage 5.8v ? 6.5v output voltage rp132x no.ea-265-160426 29 10) load transient response (v in = v out +1.0v, c1=ceramic 2.2 f , tr = tf = 0.5 s, t opt = 25 c) rp132x081x rp132x081x rp132x081x rp132x331x rp132x331x rp132x331x 0.78 0.79 0.80 0.81 0.82 0.83 0.84 0.85 -20 0 20 40 60 80 100 120 140 160 180 time t (s ) output voltage v out (v) 0 50 100 150 output current i out (ma) output current 50ma ? 100ma output voltage c2=ceramic2.2 f 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 -20 0 20 40 60 80 100 120 140 160 180 time t (s ) output voltage v out (v) 0 200 400 600 output current i out (ma) output current 100ma ? 500ma output voltage c2=ceramic2.2 f 0.76 0.78 0.80 0.82 0.84 0.86 0.88 0.90 -20 0 20 40 60 80 100 120 140 160 180 time t (s) output voltage v out (v) 0 30 60 output current i out (ma) output voltage c2=ceramic2.2 f output current 0ma ? 30ma 3.28 3.29 3.30 3.31 3.32 3.33 3.34 3.35 -20 0 20 40 60 80 100 120 140 160 180 time t (s ) output voltage v out (v) 0 50 100 150 output current i out (ma) output current 50ma ? 100ma output voltage c2=ceramic2.2 f 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 -20 0 20 40 60 80 100 120 140 160 180 time t (s ) output voltage v out (v) 0 200 400 600 output current i out (ma) output current 100ma ? 500ma output voltage c2=ceramic2.2 f 3.26 3.28 3.30 3.32 3.34 3.36 3.38 3.40 -20 0 20 40 60 80 100 120 140 160 180 time t (s) output voltage v out (v) 0 30 60 output current i out (ma) output voltage c2=ceramic2.2 f output current 0ma ? 30ma rp132x no.ea-265-160426 30 rp132x551x rp132x551x rp132x551x 11) turn on speed with ce pin (c1 = ceramic 2.2 f, t opt = 25 c) rp132x081x rp132x331x 5.48 5.49 5.50 5.51 5.52 -20 0 20 40 60 80 100 120 140 160 180 time t (s ) output voltage v out (v) 0 50 100 150 output current i out (ma) output current 50ma ? 100ma output voltage c2=ceramic4.7 f 5.2 5.3 5.4 5.5 -20 0 20 40 60 80 100 120 140 160 180 time t (s ) output voltage v out (v) 0 200 400 600 output current i out (ma) output current 100ma ? 500ma output voltage c2=ceramic4.7 f 5.46 5.48 5.50 5.52 5.54 -20 0 20 40 60 80 100 120 140 160 180 time t (s) output voltage v out (v) 0 30 60 output current i out (ma) output current 0ma ? 30ma output voltage c2=ceramic4.7 f 0.0 0.4 0.8 1.2 1.6 2.0 2.4 2.8 -50 0 50 100 150 200 250 300 350 400 450 time t (s) output voltage v out (v) 0 1 2 3 ce input voltage v ce (v) iout=0ma iout=100ma output voltage ce input voltage c2=ceramic2.2 f 0 0.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 -50 0 50 100 150 200 250 300 350 400 450 time t (s ) output voltage v out (v) 0 2 4 6 ce input voltage v ce (v) iout=0ma iout=100ma output voltage ce input v oltage c2=ceramic2.2 f 0 rp132x no.ea-265-160426 31 rp132x551x 12) turn off speed with ce pin (d version) (c1 = ceramic 2.2 f, t opt = 25 c) rp132x081d rp132x331d rp132x551d 0 2 4 6 8 10 12 14 -50 0 50 100 150 200 250 300 350 400 450 time t (s) output voltage v out (v) 0 3 6 9 ce input voltage v ce (v) iout=0ma iout=100ma output voltage ce input voltage c2=ceramic4.7 f 0 0.4 0.8 1.2 1.6 2 2.4 2.8 -0.2 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 times [ms ] output voltage [v] 0 1 2 3 ce input voltage [v] iout =0ma iout =100ma output voltage ce input v oltage v in =1.8v c2=ceramic2.2 f 0 1 2 3 4 5 6 7 -0.2 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 times [ms ] output voltage [v] 0 2 4 6 ce input voltage [v] iout=0ma iout=100ma output voltage ce input voltage v in =4.3v c2=ceramic2.2 f 0 2 4 6 8 10 12 14 -0.2 0 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 1.8 times [ms] output voltage [v] 0 3 6 9 ce input voltage [v] iout=0ma iout=100ma output voltage ce input voltage v in =6.5v c2=ceramic4.7f rp132x no.ea-265-160426 32 13) inrush current (c1 = ceramic 2.2 f, i out = 100ma, t opt = 25 c) rp132x081x rp132x331x rp132x551x 14) minimum operating voltage rp132x081x 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 -40 0 40 80 120 160 200 240 280 320 360 time t (s) ce input voltage v ce (v) output voltage v out (v) 0 100 200 300 400 500 600 700 inrush current (ma) ce input voltage output voltage inrush current v in =2.3v,c2=ceramic2.2 f 0 0 1 2 3 4 5 6 7 -40 0 40 80 120 160 200 240 280 320 360 time t (s ) ce input voltage v ce (v) output voltage v out (v) 0 100 200 300 400 500 600 700 inrush current (ma) ce input voltage output voltage inrush current v in =4.8v,c2=ceramic2.2 f 0 1 2 3 4 5 6 7 -40 0 40 80 120 160 200 240 280 320 360 time t (s ) ce input voltage v ce (v) output voltage v out (v) 0 100 200 300 400 500 600 700 inrush current (ma) ce input voltage output voltage inrush current v in =6.5v,c2=ceramic4.7 f output current i out (ma) 1 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 2 2.1 2.2 0 200 400 600 800 1000 input voltage v in (v) 2.0 1.0 the operation rage that can output 0.8v is shown by the hatched area in the graph. rp132x no.ea-265-160426 33 15) inrush current limit time vs. c d capacitance (e / f version) rp132x081x 16) inrush current limit time vs. input voltage (e / f version) rp132x081x 0 2 4 6 8 10 12 0 5 10 15 20 c d (nf) inrush current limit time (ms) v in =4.0v 0 2 4 6 8 10 12 1357 input voltage v in (v) inrush current limit time (ms) cd=20nf cd=10nf cd=2nf cd=1nf cd=none rp132x no.ea-265-160426 34 esr vs. output current when using these ics, consider the following points: the relations between i out (output current) and esr of an out put capacitor are shown below. the conditions when the white noise level is under 40 v (avg.) are marked as the hatched area in the graph. measurement conditions frequency band : 10hz to 2mhz temperature : ? 40 c to 85 c hatched area : noise level is under 40 vms (avg.) c in : 2.2 f (kyocera cm05x5r225m06a) c out : 2.2 f (v out = 0.8v, kyocera cm105x5r225k06ab) 4.7 f (v out = 5.5v, kyocera cm105x5r475m06ab) rp132x081x rp132x551x 0.01 0.1 1 10 100 0 100 200 300 400 500 600 700 800 900 100 0 output current i out (ma) esr ( ? ) vin = 1.4 v to 6.5 v c1 = 2.2 f, c2 = 2.2 f ta=85c ta=-40c 0.01 0.1 1 10 100 0 100 200 300 400 500 600 700 800 900 1000 output current i out (ma) esr ( ? ) vin = 5.5 v to 6.5 v c1 = 2.2 f, c2 = 4.7 f ta=-40, 85c rp132x no.ea-265-160426 35 package information power dissipation (dfn(plp)1820-6) power dissipation (p d ) of the package is dependent on pcb material, layout, and environmental conditions. the following conditions are used in this measurement. measurement conditions standard test land pattern environment mounting on board (wind velocity = 0 m/s) board material glass cloth epoxy plastic (double-sided) board dimensions 40 mm x 40 mm x 1.6 mm copper ratio top side: approx. 50%, back side: approx. 50% through-holes : 0.54 mm x 30 pcs measurement result (ta = 25 c) standard test land pattern power dissipation 880mw (tjmax=125 c) 1100mw (tjmax=150 c) thermal resistance ja = (125-25 c) / 0.88w = 114 c / w ic mount area (unit: mm) 40 40 power dissipation vs. ambient temperature measurement board pattern note: the above graph shows the power dissipation of the package based on tjmax=125 c and tjmax=150 c. operating the ic in the shaded area in the graph might have an influence on its lifetim e. operating time must be within the time limit described in the table below, in case of operating in the shaded area. operating time estimated years (operating four hours/ day) 13,000 hours 9 years 0 200 400 600 800 1000 1200 0 25 50 75 100 125 150 power dissipation (c) power dissipation p d (mw) 85 880 1100 rp132x no.ea-265-160426 36 package dimensions (dfn(plp)1820-6) mark specifications (dfn(plp)1820-6) c d e f : product code ?refer to rp132k series mark specification table. g h : lot number ? alphanumeric serial number 2.00 1.80 0.25 0.1 0.25 0.1 0.1nom. 0.3 0.1 0.5 0.6max. a b 0.05 x4 0.05 m ab index s 0.05min 1 2 3 4 5 6 1.6 0.1 1.0 0.1 0.20 0.1 0.05 s (unit : mm) bottom view tab is gnd level. (they are connected to the reverse side of this ic.) the tab is better to be connected to the gnd, but leaving it open is also acceptable. c d e f g h 1 2 3 6 5 4 rp132x no.ea-265-160426 37 rp132k series mark specification table pkg: dfn(plp)1820-6 rp132kxx1b rp132kxx1d rp132kxx1e rp132kxx1f u ? c d e f u ? c d e f u ? c d e f u ? c d e f O ?R rp132k081b c x 0 8 rp132k081d c y 0 8 rp132k081e d f 0 8 rp132k081f d g 0 8 0.8v rp132k091b c x 0 9 rp132k091d c y 0 9 rp132k091e d f 0 9 rp132k091f d g 0 9 0.9v rp132k101b c x 1 0 rp132k101d c y 1 0 rp132k101e d f 1 0 rp132k101f d g 1 0 1.0v rp132k111b c x 1 1 rp132k111d c y 1 1 rp132k111e d f 1 1 rp132k111f d g 1 1 1.1v rp132k121b c x 1 2 rp132k121d c y 1 2 rp132k121e d f 1 2 rp132k121f d g 1 2 1.2v rp132k131b c x 1 3 rp132k131d c y 1 3 rp132k131e d f 1 3 rp132k131f d g 1 3 1.3v rp132k141b c x 1 4 rp132k141d c y 1 4 rp132k141e d f 1 4 rp132k141f d g 1 4 1.4v rp132k151b c x 1 5 rp132k151d c y 1 5 rp132k151e d f 1 5 rp132k151f d g 1 5 1.5v rp132k161b c x 1 6 rp132k161d c y 1 6 rp132k161e d f 1 6 rp132k161f d g 1 6 1.6v rp132k171b c x 1 7 rp132k171d c y 1 7 rp132k171e d f 1 7 rp132k171f d g 1 7 1.7v rp132k181b c x 1 8 rp132k181d c y 1 8 rp132k181e d f 1 8 rp132k181f d g 1 8 1.8v rp132k191b c x 1 9 rp132k191d c y 1 9 rp132k191e d f 1 9 rp132k191f d g 1 9 1.9v rp132k201b c x 2 0 rp132k201d c y 2 0 rp132k201e d f 2 0 rp132k201f d g 2 0 2.0v rp132k211b c x 2 1 rp132k211d c y 2 1 rp132k211e d f 2 1 rp132k211f d g 2 1 2.1v rp132k221b c x 2 2 rp132k221d c y 2 2 rp132k221e d f 2 2 rp132k221f d g 2 2 2.2v rp132k231b c x 2 3 rp132k231d c y 2 3 rp132k231e d f 2 3 rp132k231f d g 2 3 2.3v rp132k241b c x 2 4 rp132k241d c y 2 4 rp132k241e d f 2 4 rp132k241f d g 2 4 2.4v rp132k251b c x 2 5 rp132k251d c y 2 5 rp132k251e d f 2 5 rp132k251f d g 2 5 2.5v rp132k261b c x 2 6 rp132k261d c y 2 6 rp132k261e d f 2 6 rp132k261f d g 2 6 2.6v rp132k271b c x 2 7 rp132k271d c y 2 7 rp132k271e d f 2 7 rp132k271f d g 2 7 2.7v rp132k281b c x 2 8 rp132k281d c y 2 8 rp132k281e d f 2 8 rp132k281f d g 2 8 2.8v rp132k291b c x 2 9 rp132k291d c y 2 9 rp132k291e d f 2 9 rp132k291f d g 2 9 2.9v rp132k301b c x 3 0 rp132k301d c y 3 0 rp132k301e d f 3 0 rp132k301f d g 3 0 3.0v rp132k311b c x 3 1 rp132k311d c y 3 1 rp132k311e d f 3 1 rp132k311f d g 3 1 3.1v rp132k321b c x 3 2 rp132k321d c y 3 2 rp132k321e d f 3 2 rp132k321f d g 3 2 3.2v rp132k331b c x 3 3 rp132k331d c y 3 3 rp132k331e d f 3 3 rp132k331f d g 3 3 3.3v rp132k341b c x 3 4 rp132k341d c y 3 4 rp132k341e d f 3 4 rp132k341f d g 3 4 3.4v rp132k351b c x 3 5 rp132k351d c y 3 5 rp132k351e d f 3 5 rp132k351f d g 3 5 3.5v rp132k361b c x 3 6 rp132k361d c y 3 6 rp132k361e d f 3 6 rp132k361f d g 3 6 3.6v rp132k371b c x 3 7 rp132k371d c y 3 7 rp132k371e d f 3 7 rp132k371f d g 3 7 3.7v rp132k381b c x 3 8 rp132k381d c y 3 8 rp132k381e d f 3 8 rp132k381f d g 3 8 3.8v rp132k391b c x 3 9 rp132k391d c y 3 9 rp132k391e d f 3 9 rp132k391f d g 3 9 3.9v rp132k401b c x 4 0 rp132k401d c y 4 0 rp132k401e d f 4 0 rp132k401f d g 4 0 4.0v rp132k411b c x 4 1 rp132k411d c y 4 1 rp132k411e d f 4 1 rp132k411f d g 4 1 4.1v rp132k421b c x 4 2 rp132k421d c y 4 2 rp132k421e d f 4 2 rp132k421f d g 4 2 4.2v rp132k431b c x 4 3 rp132k431d c y 4 3 rp132k431e d f 4 3 rp132k431f d g 4 3 4.3v rp132k441b c x 4 4 rp132k441d c y 4 4 rp132k441e d f 4 4 rp132k441f d g 4 4 4.4v rp132k451b c x 4 5 rp132k451d c y 4 5 rp132k451e d f 4 5 rp132k451f d g 4 5 4.5v rp132k461b c x 4 6 rp132k461d c y 4 6 rp132k461e d f 4 6 rp132k461f d g 4 6 4.6v rp132k471b c x 4 7 rp132k471d c y 4 7 rp132k471e d f 4 7 rp132k471f d g 4 7 4.7v rp132k481b c x 4 8 rp132k481d c y 4 8 rp132k481e d f 4 8 rp132k481f d g 4 8 4.8v rp132k491b c x 4 9 rp132k491d c y 4 9 rp132k491e d f 4 9 rp132k491f d g 4 9 4.9v rp132k501b c x 5 0 rp132k501d c y 5 0 rp132k501e d f 5 0 rp132k501f d g 5 0 5.0v rp132k511b c x 5 1 rp132k511d c y 5 1 rp132k511e d f 5 1 rp132k511f d g 5 1 5.1v rp132k521b c x 5 2 rp132k521d c y 5 2 rp132k521e d f 5 2 rp132k521f d g 5 2 5.2v rp132k531b c x 5 3 rp132k531d c y 5 3 rp132k531e d f 5 3 rp132k531f d g 5 3 5.3v rp132k541b c x 5 4 rp132k541d c y 5 4 rp132k541e d f 5 4 rp132k541f d g 5 4 5.4v rp132k551b c x 5 5 rp132k551d c y 5 5 rp132k551e d f 5 5 rp132k551f d g 5 5 5.5v rp132k121b5 c x 0 1 rp132k121d5 c y 0 1 rp132k121e5 d f 0 1 rp132k121f5 d g 0 1 1.25v rp132k181b5 c x 0 2 rp132k181d5 c y 0 2 rp132k181e5 d f 0 2 rp132k181f5 d g 0 2 1.85v rp132k281b5 c x 0 3 rp132k281d5 c y 0 3 rp132k281e5 d f 0 3 rp132k281f5 d g 0 3 2.85v rp132k001b c x 0 0 rp132k001d c y 0 0 rp132k001e d f 0 0 rp132k001f d g 0 0 - rp132x no.ea-265-160426 38 power dissipation (sot-89-5) power dissipation (p d ) depends on conditions of mounting on board. this specification is based on the measurement conditions below. measurement conditions high wattage land pattern standard land pattern environment mounting on board (wind velocity =0m/s) mounting on board (wind velocity=0m/s) board material glass cloth epoxy plastic (doubl e-sided) glass cloth epoxy plastic (double-sided) board dimensions 30mm x 30mm x 1.6mm 50mm x 50mm x 1.6mm copper ratio top-side: approx. 20%, back-side: approx. 100% top-side: approx. 10%, back-side: approx. 100% through-hole 0.85mm 10pcs - measurement result (ta=25 c) high wattage land pattern standard land pattern free air power dissipation 1300mw 900mw (tjmax=125 c) 1125mw (tjmax=150 c) 500mw thermal resistance 77 c/w 111 c/w 200 c/w power dissipation p d (mw) 1500 1400 1300 1200 1100 1000 900 800 700 600 500 400 300 200 100 0 0 25 50 75 100 125 150 ambient temperature (oc) 85 free air standard land pattern high wattage land pattern 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1500 0 25 50 75 100 125 150 1125 85 900 power dissipation p d (mw) ambient temperature (oc) standard land pattern 30 7.5 15 30 7.5 50 50 high wattage standard measurement board pattern ic mount area (unit : mm) 1 5 note: the above graph shows the power dissipation of the package based on tjmax=125 c and tjmax=150 c. operating the ic in the shaded area in the graph might have an influence on its lifetime. operating time must be within the time limit described in the table below, in case of operating in the shaded area. operating time estimated years (operating four hours/ day) 13,000 hours 9 years power dissipation rp132x no.ea-265-160426 39 package dimensions (sot-89-5) 1.50.1 1.50.1 0.470.1 0.420.1 0.420.1 1.50.1 0.40.1 0.40.1 0.1 s s 0.30.2 0.30.2 4 5 3 2 1 bottom view 0.420.1 4.50.1 1.60.2 4.350.1 2.50.1 0.40.3 5 4 1 2 3 1.0 1.000.2 unit : mm mark specifications (sot-89-5) c d e f : product code ?refer to rp132h series mark specification table. g h : lot number ? alphanumeric serial number c d e f g h rp132x no.ea-265-160426 40 rp132h series mark specification table pkg: sot-89-5 rp132hxx1b rp132hxx1d u? c d e f O?R u? c d e f O?R rp132h081b c 0 8 b 0.8v rp132h081d c 0 8 d 0.8v rp132h091b c 0 9 b 0.9v rp132h091d c 0 9 d 0.9v rp132h101b c 1 0 b 1.0v rp132h101d c 1 0 d 1.0v rp132h111b c 1 1 b 1.1v rp132h111d c 1 1 d 1.1v rp132h121b c 1 2 b 1.2v rp132h121d c 1 2 d 1.2v rp132h131b c 1 3 b 1.3v rp132h131d c 1 3 d 1.3v rp132h141b c 1 4 b 1.4v rp132h141d c 1 4 d 1.4v rp132h151b c 1 5 b 1.5v rp132h151d c 1 5 d 1.5v rp132h161b c 1 6 b 1.6v rp132h161d c 1 6 d 1.6v rp132h171b c 1 7 b 1.7v rp132h171d c 1 7 d 1.7v rp132h181b c 1 8 b 1.8v rp132h181d c 1 8 d 1.8v rp132h191b c 1 9 b 1.9v rp132h191d c 1 9 d 1.9v rp132h201b c 2 0 b 2.0v rp132h201d c 2 0 d 2.0v rp132h211b c 2 1 b 2.1v rp132h211d c 2 1 d 2.1v rp132h221b c 2 2 b 2.2v rp132h221d c 2 2 d 2.2v rp132h231b c 2 3 b 2.3v rp132h231d c 2 3 d 2.3v rp132h241b c 2 4 b 2.4v rp132h241d c 2 4 d 2.4v rp132h251b c 2 5 b 2.5v rp132h251d c 2 5 d 2.5v rp132h261b c 2 6 b 2.6v rp132h261d c 2 6 d 2.6v rp132h271b c 2 7 b 2.7v rp132h271d c 2 7 d 2.7v rp132h281b c 2 8 b 2.8v rp132h281d c 2 8 d 2.8v rp132h291b c 2 9 b 2.9v rp132h291d c 2 9 d 2.9v rp132h301b c 3 0 b 3.0v rp132h301d c 3 0 d 3.0v rp132h311b c 3 1 b 3.1v rp132h311d c 3 1 d 3.1v rp132h321b c 3 2 b 3.2v rp132h321d c 3 2 d 3.2v rp132h331b c 3 3 b 3.3v rp132h331d c 3 3 d 3.3v rp132h341b c 3 4 b 3.4v rp132h341d c 3 4 d 3.4v rp132h351b c 3 5 b 3.5v rp132h351d c 3 5 d 3.5v rp132h361b c 3 6 b 3.6v rp132h361d c 3 6 d 3.6v rp132h371b c 3 7 b 3.7v rp132h371d c 3 7 d 3.7v rp132h381b c 3 8 b 3.8v rp132h381d c 3 8 d 3.8v rp132h391b c 3 9 b 3.9v rp132h391d c 3 9 d 3.9v rp132h401b c 4 0 b 4.0v rp132h401d c 4 0 d 4.0v rp132h411b c 4 1 b 4.1v rp132h411d c 4 1 d 4.1v rp132h421b c 4 2 b 4.2v rp132h421d c 4 2 d 4.2v rp132h431b c 4 3 b 4.3v rp132h431d c 4 3 d 4.3v rp132h441b c 4 4 b 4.4v rp132h441d c 4 4 d 4.4v rp132h451b c 4 5 b 4.5v rp132h451d c 4 5 d 4.5v rp132h461b c 4 6 b 4.6v rp132h461d c 4 6 d 4.6v rp132h471b c 4 7 b 4.7v rp132h471d c 4 7 d 4.7v rp132h481b c 4 8 b 4.8v rp132h481d c 4 8 d 4.8v rp132h491b c 4 9 b 4.9v rp132h491d c 4 9 d 4.9v rp132h501b c 5 0 b 5.0v rp132h501d c 5 0 d 5.0v rp132h511b c 5 1 b 5.1v rp132h511d c 5 1 d 5.1v rp132h521b c 5 2 b 5.2v rp132h521d c 5 2 d 5.2v rp132h531b c 5 3 b 5.3v rp132h531d c 5 3 d 5.3v rp132h541b c 5 4 b 5.4v rp132h541d c 5 4 d 5.4v rp132h551b c 5 5 b 5.5v rp132h551d c 5 5 d 5.5v rp132h121b5 c 0 1 b 1.25v rp132h121d5 c 0 1 d 1.25v rp132h181b5 c 0 2 b 1.85v rp132h181d5 c 0 2 d 1.85v rp132h281b5 c 0 3 b 2.85v rp132h281d5 c 0 3 d 2.85v rp132h001b c 0 0 b - rp132h001d c 0 0 d - rp132x no.ea-265-160426 41 power dissipation (hsop-6j) power dissipation (p d ) depends on conditions of mounting on board. this specification is based on the measurement conditions below. measurement conditions high wattage land pattern standard land pattern environment mounting on board (wind velocity=0m/s) mounting on board (wind velocity=0m/s) board material glass cloth epoxy plastic (double-sided) glass cloth epoxy plastic (double-sided) board dimensions 50mm x 50mm x 1.6mm 50mm x 50mm x 1.6mm copper ratio 90% 50% through-hole 0.5mm x 24pcs 0.5mm x 24pcs measurement result ta = 2 5 high wattage land pattern standard land pattern free air power dissipation 2000mw 1700mw (tjmax=125 c) 2125mw (tjmax=150 c) 540mw thermal resistance 50 c/w 59 c/w 185 c/w high wattage standard measurement board pattern ic mount area (unit: mm) 49 10 18 50 50 40 20 20 note: the above graph shows the power dissipation of the package based on tjmax=125 c and tjmax=150 c. operating the ic in the shaded area in the graph might have an influence on its lifetime. operating time must be within the time limit described in the table below, in case of operating in the shaded area. operating time estimated years (operating four hours/ day) 13,000 hours 9 years 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 0 25 50 75 100 125 150 ambient temperature (oc) power dissipation p d (mw) 2125 85 on board (standard land pattern) 1700 power dissi p ation power dissipation p d ( w) 2600 2400 2200 2000 1800 1600 1400 1200 1000 800 600 400 200 0 0 25 50 75 100 125 150 ambient temperature ( c) 85 1700 540 on board (high wattage land pattern) on board (standard land pattern) free air rp132x no.ea-265-160426 42 package dimensions (hsop-6j) 3.81 123 5.020.3 654 (unit: mm) 0.10 0.12 m 0.605typ. 0.150.1 1.50.1 1.670.1 0.40.1 0.600.2 0.2 6.00.3 3.90.2 + 0.10 - 0.05 mark specifications (hsop-6j) c d e f : product code ?refer to rp132s series mark specification table. g h : lot number ? alphanumeric serial number f g h c d e rp132x no.ea-265-160426 43 rp132s series mark specification table pkg: hsop-6j rp132sxx1b rp132sxx1d rp132sxx1e rp132sxx1f u? c d e f u? c d e f u? c d e f u? c d e f O?R rp132s081b q 0 8 b rp132s081d q 0 8 d rp132s081e q 0 8 e rp132s081f q 0 8 f 0.8v rp132s091b q 0 9 b rp132s091d q 0 9 d rp132s091e q 0 9 e rp132s091f q 0 9 f 0.9v rp132s101b q 1 0 b rp132s101d q 1 0 d rp132s101e q 1 0 e rp132s101f q 1 0 f 1.0v rp132s111b q 1 1 b rp132s111d q 1 1 d rp132s111e q 1 1 e rp132s111f q 1 1 f 1.1v rp132s121b q 1 2 b rp132s121d q 1 2 d rp132s121e q 1 2 e rp132s121f q 1 2 f 1.2v rp132s131b q 1 3 b rp132s131d q 1 3 d rp132s131e q 1 3 e rp132s131f q 1 3 f 1.3v rp132s141b q 1 4 b rp132s141d q 1 4 d rp132s141e q 1 4 e rp132s141f q 1 4 f 1.4v rp132s151b q 1 5 b rp132s151d q 1 5 d rp132s151e q 1 5 e rp132s151f q 1 5 f 1.5v rp132s161b q 1 6 b rp132s161d q 1 6 d rp132s161e q 1 6 e rp132s161f q 1 6 f 1.6v rp132s171b q 1 7 b rp132s171d q 1 7 d rp132s171e q 1 7 e rp132s171f q 1 7 f 1.7v rp132s181b q 1 8 b rp132s181d q 1 8 d rp132s181e q 1 8 e rp132s181f q 1 8 f 1.8v rp132s191b q 1 9 b rp132s191d q 1 9 d rp132s191e q 1 9 e rp132s191f q 1 9 f 1.9v rp132s201b q 2 0 b rp132s201d q 2 0 d rp132s201e q 2 0 e rp132s201f q 2 0 f 2.0v rp132s211b q 2 1 b rp132s211d q 2 1 d rp132s211e q 2 1 e rp132s211f q 2 1 f 2.1v rp132s221b q 2 2 b rp132s221d q 2 2 d rp132s221e q 2 2 e rp132s221f q 2 2 f 2.2v rp132s231b q 2 3 b rp132s231d q 2 3 d rp132s231e q 2 3 e rp132s231f q 2 3 f 2.3v rp132s241b q 2 4 b rp132s241d q 2 4 d rp132s241e q 2 4 e rp132s241f q 2 4 f 2.4v rp132s251b q 2 5 b rp132s251d q 2 5 d rp132s251e q 2 5 e rp132s251f q 2 5 f 2.5v rp132s261b q 2 6 b rp132s261d q 2 6 d rp132s261e q 2 6 e rp132s261f q 2 6 f 2.6v rp132s271b q 2 7 b rp132s271d q 2 7 d rp132s271e q 2 7 e rp132s271f q 2 7 f 2.7v rp132s281b q 2 8 b rp132s281d q 2 8 d rp132s281e q 2 8 e rp132s281f q 2 8 f 2.8v rp132s291b q 2 9 b rp132s291d q 2 9 d rp132s291e q 2 9 e rp132s291f q 2 9 f 2.9v rp132s301b q 3 0 b rp132s301d q 3 0 d rp132s301e q 3 0 e rp132s301f q 3 0 f 3.0v rp132s311b q 3 1 b rp132s311d q 3 1 d rp132s311e q 3 1 e rp132s311f q 3 1 f 3.1v rp132s321b q 3 2 b rp132s321d q 3 2 d rp132s321e q 3 2 e rp132s321f q 3 2 f 3.2v rp132s331b q 3 3 b rp132s331d q 3 3 d rp132s331e q 3 3 e rp132s331f q 3 3 f 3.3v rp132s341b q 3 4 b rp132s341d q 3 4 d rp132s341e q 3 4 e rp132s341f q 3 4 f 3.4v rp132s351b q 3 5 b rp132s351d q 3 5 d rp132s351e q 3 5 e rp132s351f q 3 5 f 3.5v rp132s361b q 3 6 b rp132s361d q 3 6 d rp132s361e q 3 6 e rp132s361f q 3 6 f 3.6v rp132s371b q 3 7 b rp132s371d q 3 7 d rp132s371e q 3 7 e rp132s371f q 3 7 f 3.7v rp132s381b q 3 8 b rp132s381d q 3 8 d rp132s381e q 3 8 e rp132s381f q 3 8 f 3.8v rp132s391b q 3 9 b rp132s391d q 3 9 d rp132s391e q 3 9 e rp132s391f q 3 9 f 3.9v rp132s401b q 4 0 b rp132s401d q 4 0 d rp132s401e q 4 0 e rp132s401f q 4 0 f 4.0v rp132s411b q 4 1 b rp132s411d q 4 1 d rp132s411e q 4 1 e rp132s411f q 4 1 f 4.1v rp132s421b q 4 2 b rp132s421d q 4 2 d rp132s421e q 4 2 e rp132s421f q 4 2 f 4.2v rp132s431b q 4 3 b rp132s431d q 4 3 d rp132s431e q 4 3 e rp132s431f q 4 3 f 4.3v rp132s441b q 4 4 b rp132s441d q 4 4 d rp132s441e q 4 4 e rp132s441f q 4 4 f 4.4v rp132s451b q 4 5 b rp132s451d q 4 5 d rp132s451e q 4 5 e rp132s451f q 4 5 f 4.5v rp132s461b q 4 6 b rp132s461d q 4 6 d rp132s461e q 4 6 e rp132s461f q 4 6 f 4.6v rp132s471b q 4 7 b rp132s471d q 4 7 d rp132s471e q 4 7 e rp132s471f q 4 7 f 4.7v rp132s481b q 4 8 b rp132s481d q 4 8 d rp132s481e q 4 8 e rp132s481f q 4 8 f 4.8v rp132s491b q 4 9 b rp132s491d q 4 9 d rp132s491e q 4 9 e rp132s491f q 4 9 f 4.9v rp132s501b q 5 0 b rp132s501d q 5 0 d rp132s501e q 5 0 e rp132s501f q 5 0 f 5.0v rp132s511b q 5 1 b rp132s511d q 5 1 d rp132s511e q 5 1 e rp132s511f q 5 1 f 5.1v rp132s521b q 5 2 b rp132s521d q 5 2 d rp132s521e q 5 2 e rp132s521f q 5 2 f 5.2v rp132s531b q 5 3 b rp132s531d q 5 3 d rp132s531e q 5 3 e rp132s531f q 5 3 f 5.3v rp132s541b q 5 4 b rp132s541d q 5 4 d rp132s541e q 5 4 e rp132s541f q 5 4 f 5.4v rp132s551b q 5 5 b rp132s551d q 5 5 d rp132s551e q 5 5 e rp132s551f q 5 5 f 5.5v rp132s121b5 q 0 1 b rp132s121d5 q 0 1 d rp132s121e5 q 0 1 e rp132s121f5 q 0 1 f 1.25v rp132s181b5 q 0 2 b rp132s181d5 q 0 2 d rp132s181e5 q 0 2 e rp132s181f5 q 0 2 f 1.85v rp132s281b5 q 0 3 b rp132s281d5 q 0 3 d rp132s281e5 q 0 3 e rp132s281f5 q 0 3 f 2.85v rp132s001b q 0 0 b rp132s001d q 0 0 d - - - - - rp132x no.ea-265-160426 44 power dissipation (to-252-5-p2) power dissipation (p d ) depends on conditions of mounting on board . this specification is based on the measurement conditions below. measurement conditions high wattage land pattern standard land pattern environment mounting on board (wind velocity 0m/s) m ounting on board (wind velocity 0m/s) board material glass cloth epoxy plastic (double layers) glass cloth epoxy plastic (four-layers) board dimensions 50mm 50mm 1.6mm 76.2mm 114.3mm 0.8 mm copper ratio top side: approx. 50%, back side: approx. 50% top, back side: approx. 96%, 2nd, 3rd: 100% through - hole 0.5mm x 24pcs 0.4mm x 30pcs measurement results (ta=25 c) high wattage land pattern standard land pattern power dissipation 1900mw (tjmax=125 c) 2375mw (tjmax=150 c) 3800mw (tjmax=125 c) 4750mw (tjmax=150 c) thermal resistance ja= (125-25 c)/1.9w = 53 c/w c)/3.8w = 26 c/w jc= 17 c/w c/w 0 200 400 600 800 1000 1200 1400 1600 1800 2000 2200 2400 2600 0 25 50 75 100 125 150 ?? (c) S?p? pd (mw) 85 2375 1900 a g? 0 400 800 1200 1600 2000 2400 2800 3200 3600 4000 4400 4800 5200 0 25 50 75 100 125 150 ?? (c) S?p? pd (mw) 85 4750 3800 b g? 50 50 high wattage land pattern ic mount area (unit: mm) standard land pattern ic mount area (unit: mm) 76.2 40 114.3 50 50 note: the above graph shows the power dissipation of the package based on tjmax=125 c and tjmax=150 c. operating the ic in the shaded area in the graph might have an influence on its lifetime. operating time must be within the time limit described in the table below, in case of operating in the shaded area. operating time estimated years (operating four hours/ day) 13,000 hours 9 years standard land pattern power dissi p ation power dissipation p d (mw) power dissipation p d (mw) a mbient tem p erature ( oc ) ambient tem p erature ( oc ) hi g h watta g e land pattern rp132x no.ea-265-160426 45 package dimensions (to-252-5-p2) (unit: mm) 0.50 0.10 0.50 0.10 (0 8 ) 1.52 + 0.26 - 0.13 (0 0.127) s 0.12 m 0.50 0.10 2.30 0.20 (1.00) 0.10 (6.20) 6.60 0.20 5.34 0.20 6.10 0.20 (1.00) 9.90 0.30 1.10 0.20 c0.60 1.27 2.70 0.20 (4.06) (3.56) r0.325 r0.225 (4.19) (1.50) (5.04) 15 mark specifications (to-252-5-p2) c d e f g h i j : refer to rp132j series mark specification table. k l : lot number ? alphanumeric serial number ????? ? rp132x no.ea-265-160426 46 rp132j series mark specification table pkg: to-252-5-p2 rp132jxx1b rp132jxx1d u? c d e f g h i j O?R u? c d e f g h i j O?R rp132j081b g 1 j 0 8 1 b 0.8v rp132j081d g 1 j 0 8 1 d 0.8v rp132j091b g 1 j 0 9 1 b 0.9v rp132j091d g 1 j 0 9 1 d 0.9v rp132j101b g 1 j 1 0 1 b 1.0v rp132j101d g 1 j 1 0 1 d 1.0v rp132j111b g 1 j 1 1 1 b 1.1v rp132j111d g 1 j 1 1 1 d 1.1v rp132j121b g 1 j 1 2 1 b 1.2v rp132j121d g 1 j 1 2 1 d 1.2v rp132j131b g 1 j 1 3 1 b 1.3v rp132j131d g 1 j 1 3 1 d 1.3v rp132j141b g 1 j 1 4 1 b 1.4v rp132j141d g 1 j 1 4 1 d 1.4v rp132j151b g 1 j 1 5 1 b 1.5v rp132j151d g 1 j 1 5 1 d 1.5v rp132j161b g 1 j 1 6 1 b 1.6v rp132j161d g 1 j 1 6 1 d 1.6v rp132j171b g 1 j 1 7 1 b 1.7v rp132j171d g 1 j 1 7 1 d 1.7v rp132j181b g 1 j 1 8 1 b 1.8v rp132j181d g 1 j 1 8 1 d 1.8v rp132j191b g 1 j 1 9 1 b 1.9v rp132j191d g 1 j 1 9 1 d 1.9v rp132j201b g 1 j 2 0 1 b 2.0v rp132j201d g 1 j 2 0 1 d 2.0v rp132j211b g 1 j 2 1 1 b 2.1v rp132j211d g 1 j 2 1 1 d 2.1v rp132j221b g 1 j 2 2 1 b 2.2v rp132j221d g 1 j 2 2 1 d 2.2v rp132j231b g 1 j 2 3 1 b 2.3v rp132j231d g 1 j 2 3 1 d 2.3v rp132j241b g 1 j 2 4 1 b 2.4v rp132j241d g 1 j 2 4 1 d 2.4v rp132j251b g 1 j 2 5 1 b 2.5v rp132j251d g 1 j 2 5 1 d 2.5v rp132j261b g 1 j 2 6 1 b 2.6v rp132j261d g 1 j 2 6 1 d 2.6v rp132j271b g 1 j 2 7 1 b 2.7v rp132j271d g 1 j 2 7 1 d 2.7v rp132j281b g 1 j 2 8 1 b 2.8v rp132j281d g 1 j 2 8 1 d 2.8v rp132j291b g 1 j 2 9 1 b 2.9v rp132j291d g 1 j 2 9 1 d 2.9v rp132j301b g 1 j 3 0 1 b 3.0v rp132j301d g 1 j 3 0 1 d 3.0v rp132j311b g 1 j 3 1 1 b 3.1v rp132j311d g 1 j 3 1 1 d 3.1v rp132j321b g 1 j 3 2 1 b 3.2v rp132j321d g 1 j 3 2 1 d 3.2v rp132j331b g 1 j 3 3 1 b 3.3v rp132j331d g 1 j 3 3 1 d 3.3v rp132j341b g 1 j 3 4 1 b 3.4v rp132j341d g 1 j 3 4 1 d 3.4v rp132j351b g 1 j 3 5 1 b 3.5v rp132j351d g 1 j 3 5 1 d 3.5v rp132j361b g 1 j 3 6 1 b 3.6v rp132j361d g 1 j 3 6 1 d 3.6v rp132j371b g 1 j 3 7 1 b 3.7v rp132j371d g 1 j 3 7 1 d 3.7v rp132j381b g 1 j 3 8 1 b 3.8v rp132j381d g 1 j 3 8 1 d 3.8v rp132j391b g 1 j 3 9 1 b 3.9v rp132j391d g 1 j 3 9 1 d 3.9v rp132j401b g 1 j 4 0 1 b 4.0v rp132j401d g 1 j 4 0 1 d 4.0v rp132j411b g 1 j 4 1 1 b 4.1v rp132j411d g 1 j 4 1 1 d 4.1v rp132j421b g 1 j 4 2 1 b 4.2v rp132j421d g 1 j 4 2 1 d 4.2v rp132j431b g 1 j 4 3 1 b 4.3v rp132j431d g 1 j 4 3 1 d 4.3v rp132j441b g 1 j 4 4 1 b 4.4v rp132j441d g 1 j 4 4 1 d 4.4v rp132j451b g 1 j 4 5 1 b 4.5v rp132j451d g 1 j 4 5 1 d 4.5v rp132j461b g 1 j 4 6 1 b 4.6v rp132j461d g 1 j 4 6 1 d 4.6v rp132j471b g 1 j 4 7 1 b 4.7v rp132j471d g 1 j 4 7 1 d 4.7v rp132j481b g 1 j 4 8 1 b 4.8v rp132j481d g 1 j 4 8 1 d 4.8v rp132j491b g 1 j 4 9 1 b 4.9v rp132j491d g 1 j 4 9 1 d 4.9v rp132j501b g 1 j 5 0 1 b 5.0v rp132j501d g 1 j 5 0 1 d 5.0v rp132j511b g 1 j 5 1 1 b 5.1v rp132j511d g 1 j 5 1 1 d 5.1v rp132j521b g 1 j 5 2 1 b 5.2v rp132j521d g 1 j 5 2 1 d 5.2v rp132j531b g 1 j 5 3 1 b 5.3v rp132j531d g 1 j 5 3 1 d 5.3v rp132j541b g 1 j 5 4 1 b 5.4v rp132j541d g 1 j 5 4 1 d 5.4v rp132j551b g 1 j 5 5 1 b 5.5v rp132j551d g 1 j 5 5 1 d 5.5v rp132j121b5 g 1 j 1 2 1 b 5 1.25v rp132j121d5 g 1 j 1 2 1 d 5 1.25v rp132j181b5 g 1 j 1 8 1 b 5 1.85v rp132j181d5 g 1 j 1 8 1 d 5 1.85v rp132j281b5 g 1 j 2 8 1 b 5 2.85v rp132j281d5 g 1 j 2 8 1 d 5 2.85v rp132j001b g 1 j 0 0 1 b - rp132j001d g 1 j 0 0 1 d - http://www.e-devices.ricoh.co.jp/en/ 4 b m f t 4 v q q p s u 0$? d f t 3 * $ 0 ) & - & $ 5 3 0 / * $ % & 7 * $ & 4 $ 0 - 5 % ) j h b t i j 4 i j o b h b x b 0$? d f * o u f s o b u j p o b m 4 b m f t ) j h b t i j 4 i j o b h b x b 4 i j o b h b x b l v 5 p l z p + b q b o 1 i p o f ' b y 3 * $ 0 ) & 6 3 0 1 & / & 5 ) & 3 - " / % 4 # 7 4 f n j d p o e v d u p s 4 v q q p s u $ f o u s f 1 s p g 8 ) , f f t p n m b b o % + " n t u f m w f f o 5 i f / f u i f s m b o e t 1 i p o f 3 * $ 0 ) * / 5 & 3 / " 5 * 0 / " - # 7 ( f s n b o # s b o d i 4 f n j d p o e v d u p s 4 b m f t b o e 4 v q q p s u $ f o u s f 0 c f s s b u i f s 4 u s b t t f % ? t t f m e p s g ( f s n b o z 1 i p o f 3 * $ 0 ) & - & $ 5 3 0 / * $ % & 7 * $ & 4 , 0 3 & " $ 0 - 5 % ' ) b f t v o h # m e h 5 f i f s b o s p ( b o h o b n h v 4 f p v m , p s f b 1 i p o f ' b y 3 * $ 0 ) & - & $ 5 3 0 / * $ % & 7 * $ & 4 4 ) " / ( ) " * $ 0 - 5 % 3 p p n / p # v j m e j o h / p # j c p 3 p b e 1 v % p o h / f x % j t u s j d u 4 i b o h i b j 1 f p q m f t 3 f q v c m j d p g $ i j o b 1 i p o f ' b y 3 * $ 0 ) & - & $ 5 3 0 / * $ % & 7 * $ & 4 $ 0 - 5 % 5 b j q f j p$? d f 3 p p n ' / p ) f o h z b o h 3 e 5 b j q f j $ j u z 5 b j x b o 3 0 $ 1 i p o f ' b y ricoh is committed to reducing the environmental loading materials in electrical devices with a view to contributing to the protection of human health and the environment. ricoh has been providing rohs compliant products since april 1, 2006 and halogen-free products since april 1, 2012. halogen free 5 i f q s p e v d u t b o e u i f q s p e v d u t q f d j p d b u j p o t e f t d s j c f e j o u i j t e p d v n f o u b s f t v c k f d u u p d i b o h f p s e j t d p o u j o v b u j p o p g q s p e v d u j p o x j u i p v u o p u j d f g p s s f b t p o t t v d i b t j n q s p w f n f o u 5 i f s f g p s f c f g p s f e f d j e j o h u p v t f u i f q s p e v d u t q m f b t f s f g f s u p 3 j d p i t b m f t s f q s f t f o u b u j w f t g p s u i f m b u f t u j o g p s n b u j p o u i f s f p o 5 i f n b u f s j b m t j o u i j t e p d v n f o u n b z o p u c f d p q j f e p s p u i f s x j t f s f q s p e v d f e j o x i p m f p s j o q b s u x j u i p v u q s j p s x s j u u f o d p o t f o u p g 3 j d p i 1 m f b t f c f t v s f u p u b l f b o z o f d f t t b s z g p s n b m j u j f t v o e f s s f m f w b o u m b x t p s s f h v m b u j p o t c f g p s f f y q p s u j o h p s p u i f s x j t f u b l j o h p v u p g z p v s d p v o u s z u i f q s p e v d u t p s u i f u f d i o j d b m j o g p s n b u j p o e f t d s j c f e i f s f j o 5 i f u f d i o j d b m j o g p s n b u j p o e f t d s j c f e j o u i j t e p d v n f o u t i p x t u z q j d b m d i b s b d u f s j t u j d t p g b o e f y b n q m f b q q m j d b u j p o d j s d v j u t g p s u i f q s p e v d u t 5 i f s f m f b t f p g t v d i j o g p s n b u j p o j t o p u u p c f d p o t u s v f e b t b x b s s b o u z p g p s b h s b o u p g m j d f o t f v o e f s 3 j d p i t p s b o z u i j s e q b s u z t j o u f m m f d u v b m q s p q f s u z s j h i u t p s b o z p u i f s s j h i u t 5 i f q s p e v d u t m j t u f e j o u i j t e p d v n f o u b s f j o u f o e f e b o e e f t j h o f e g p s v t f b t h f o f s b m f m f d u s p o j d d p n q p o f o u t j o t u b o e b s e b q q m j d b u j p o t p$? d f f r v j q n f o u u f m f d p n n v o j d b u j p o f r v j q n f o u n f b t v s j o h j o t u s v n f o u t d p o t v n f s f m f d u s p o j d q s p e v d u t b n v t f n f o u f r v j q n f o u f u d 5 i p t f d v t u p n f s t j o u f o e j o h u p v t f b q s p e v d u j o b o b q q m j d b u j p o s f r v j s j o h f y u s f n f r v b m j u z b o e s f m j b c j m j u z g p s f y b n q m f j o b i j h i m z t q f d j p d b q q m j d b u j p o x i f s f u i f g b j m v s f p s n j t p q f s b u j p o p g u i f q s p e v d u d p v m e s f t v m u j o i v n b o j o k v s z p s e f b u i b j s d s b g u t q b d f w f i j d m f o v d m f b s s f b d u p s d p o u s p m t z t u f n u s b$? d d p o u s p m t z t u f n b v u p n p u j w f b o e u s b o t q p s u b u j p o f r v j q n f o u d p n c v t u j p o f r v j q n f o u t b g f u z e f w j d f t m j g f t v q q p s u t z t u f n f u d t i p v m e p s t u d p o u b d u v t 8 f b s f n b l j o h p v s d p o u j o v p v t f$? p s u u p j n q s p w f u i f r v b m j u z b o e s f m j b c j m j u z p g p v s q s p e v d u t c v u t f n j d p o e v d u p s q s p e v d u t b s f m j l f m z u p g b j m x j u i d f s u b j o q s p c b c j m j u z * o p s e f s u p q s f w f o u b o z j o k v s z u p q f s t p o t p s e b n b h f t u p q s p q f s u z s f t v m u j o h g s p n t v d i g b j m v s f d v t u p n f s t t i p v m e c f d b s f g v m f o p v h i u p j o d p s q p s b u f t b g f u z n f b t v s f t j o u i f j s e f t j h o t v d i b t s f e v o e b o d z g f b u v s f p s f d p o u b j o n f o u g f b u v s f b o e g b j m t b g f g f b u v s f 8 f e p o p u b t t v n f b o z m j b c j m j u z p s s f t q p o t j c j m j u z g p s b o z m p t t p s e b n b h f b s j t j o h g s p n n j t v t f p s j o b q q s p q s j b u f v t f p g u i f q s p e v d u t " o u j s b e j b u j p o e f t j h o j t o p u j n q m f n f o u f e j o u i f q s p e v d u t e f t d s j c f e j o u i j t e p d v n f o u 1 m f b t f d p o u b d u 3 j d p i t b m f t s f q s f t f o u b u j w f t t i p v m e z p v i b w f b o z r v f t u j p o t p s d p n n f o u t d p o d f s o j o h u i f q s p e v d u t p s u i f u f d i o j d b m j o g p s n b u j p o |
Price & Availability of RP132K201F-TR
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |